HomeMy WebLinkAboutZ-953 BOC Action
NEW HANOVER COUNTY
PLANNING & INSPECTIONS DEPARTMENT
230 GOVERNMENT CENTER DRIVE, SUITE 110
WILMINGTON, NORTH CAROLINA 28403
TELEPHONE (910) 798-7165
FAX (910) 798-7053
May 4, 2016
Allison Engebretson
Paramounte Engineering, Inc.
5911 Oleander Drive, Suite 201
Wilmington, NC 28403
VIA EMAIL: aengebretson@paramounte-eng.com
RE: Z-953 – Conditional Zoning District – Hanover Lakes Commercial/Office Building
Ms. Engebretson,
At their May 2, 2016 meeting, the Board of Commissioners voted (5-0) to approve your application
to rezone 2.2 acres of land located at the 2100 block of Castle Hayne Road from R-15, Residential
District, to (CZD) O&I, Conditional Office and Institutional District, in order to develop a
commercial/office building. The following conditions were placed on the district:
1. No more than a total of 100 peak hour trips can be generated from the use or combination
of uses located within the zoning district. Change of use proposals must be reviewed and
approved by the County in order to verify compliance with the zoning district standards.
2. The development shall comply with all provisions of an approved NCDOT driveway permit
prior to issuance of the Certificate of Occupancy.
3. Freestanding signage shall be limited to monument signs, in that the sign must have a
support structure that is a solid-appearing base constructed of a permanent material, such
as concrete block or brick. Freestanding signs supported by poles and any flashing, digital
signs shall be prohibited.
4. Existing vegetation must remain within the bufferyards and be supplemented as necessary
to provide the 100% visual opacity requirement.
The official order will be mailed to you once it is completed.
Chris O’Keefe, AICP
Planning & Inspections
Director
Dennis Bordeaux
Inspections Manager Ken Vafier, AICP
Planning Manager
-2-
If you have any questions or concerns, please do not hesitate to contact me at (910) 798-7444 or
bschuler@nhcgov.com.
Sincerely,
Bradley W. Schuler, AICP
Current Planner
cc: Z-953 File